[C320-list] HELP

[marshall at merry-thought.com]

   Not sure if Jeff got back to you but JPG's should be fine.

   Marshall



   Marshall & Diane Lucas

   & The Merrythought Poodles

   SV Catalina 320 #`1037 Merrythought

   -------- Original Message --------
   Subject: Re: [C320-list] HELP
   From: "Dingo Is Talent" <[1]dingoistalent at bigpond.com>
   Date: Sun, April 07, 2013 10:10 pm
   To: <[2]C320-List at Catalina320.com>
   Thanks Jeff
   Will do - Mine are definitely glued internally -
   Will the 320 email system take JPG's as an attachment to these emails ?
   or
   do I need to download to somewhere else?
   Ron
   1150
   -----Original Message-----
   From: [3]c320-list-bounces at lists.catalina320.com
   [[4]mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Jeff
   Hare
   Sent: Monday, 8 April 2013 9:38 AM
   To: [5]C320-List at Catalina320.com
   Subject: Re: [C320-list] HELP
   Ron,
   Interesting, any chance you could snap some pictures up close so we can
   see
   what's going on? I don't know whether this is the same as your boat,
   but
   we have to be very careful to keep the Mainsheet from getting pinched
   when
   pulling that hatch closed. I thought this handle was actually
   thru-bolted
   to a flange/seal part that fits on the other side of the glass.
   You should indicate what hull number you have because that makes a
   difference in many cases.
   -Jeff
   -----Original Message-----
   From: [6]c320-list-bounces at lists.catalina320.com
   [[7]mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Dingo
   Is
   Talent
   Sent: Saturday, April 06, 2013 7:53 PM
   To: [8]c320-list at lists.catalina320.com
   Subject: [C320-list] HELP
   HI FELOW 320 owners
   Ron from down-under here..
   I had the misfortune of having hatch 'lock down' fitting come off when
   closing the W/c hatch.
   It is glues into a recess in the glass of the hatch. I should be able
   to
   pick out the old glue
   Could anyone please advise how one could re attach this and with what
   type
   of GLUE.
   Has it happened to anyone else in the group.?
   Obviously it would need to be very strong adhesive and stand very high
   Australian temperatures..
   It also get pressure when you close it tight so it needs to be STEEL
   STRONG!
   ..
   Any help appreciated.
   Ron
   Sprit Of Tommy
   Hull 1150 Perth Western Australia

References

   1. mailto:dingoistalent at bigpond.com
   2. mailto:C320-List at Catalina320.com
   3. mailto:c320-list-bounces at lists.catalina320.com
   4. mailto:c320-list-bounces at lists.catalina320.com
   5. mailto:C320-List at Catalina320.com
   6. mailto:c320-list-bounces at lists.catalina320.com
   7. mailto:c320-list-bounces at lists.catalina320.com
   8. mailto:c320-list at lists.catalina320.com