[C320-list] Crib board dimensions

[dprudden]

Colin, thank you. Your measurements are just what I needed.

David Prudden
#787

Sent from my iPhone

On Feb 3, 2013, at 3:20 PM, "Colin Evans" <twosailors at bigpond.com> wrote:

> I made a board from 8mm plywood.  The dimensions are 785mm wide at the top,
> 645mm at the bottom and 720mm high.  They are a loose fit.
> I cut the board, checked for size then put on two hinges, took the hinges
> off and cut across the middle at a slight angle to shed water as Simon did.
> So now I have a (painted) temporary board which folds in half. Easy to
> store.  I just swap the catch  when I varnish the companionway board.
> 
> 
> *************************
> Regards
> Colin Evans
> Watermark 
> 2000 C320 # 774 
> Lake Macquarie, Australia
> 
> 
> -----Original Message-----
> From: c320-list-bounces at lists.catalina320.com
> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of dprudden
> Sent: Monday, 4 February 2013 3:29 AM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Crib board dimensions
> 
> Does anyone know the dimensions of the companionway, or more specifically,
> the crib board overall dimensions? I need to make a temporary crib board or
> single piece of plywood so i can remove and refinish my crib boards (i don't
> like Cetol-varnish looks so
> much better) and my boat is covered and an hour away.
> 
> Thanks,
> David Prudden
> #787
>