[C320-list] Crib board dimensions

[Colin Evans]

I made a board from 8mm plywood.  The dimensions are 785mm wide at the top,
645mm at the bottom and 720mm high.  They are a loose fit.
I cut the board, checked for size then put on two hinges, took the hinges
off and cut across the middle at a slight angle to shed water as Simon did.
So now I have a (painted) temporary board which folds in half. Easy to
store.  I just swap the catch  when I varnish the companionway board.


*************************
Regards
Colin Evans
Watermark 
2000 C320 # 774 
Lake Macquarie, Australia
 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of dprudden
Sent: Monday, 4 February 2013 3:29 AM
To: C320-List at Catalina320.com
Subject: [C320-list] Crib board dimensions

Does anyone know the dimensions of the companionway, or more specifically,
the crib board overall dimensions? I need to make a temporary crib board or
single piece of plywood so i can remove and refinish my crib boards (i don't
like Cetol-varnish looks so
much better) and my boat is covered and an hour away.

Thanks,
David Prudden
#787