[C320-list] Crib board dimensions

[Colin Evans]

Lou,
The height of 19 5/8" seems a bit short. My basic temporary piece of plywood
is 720mm or 28 5/16" in your language.  Assuming US inches are the same as
Imperial.  
The other dimesnions for my ragged piece of ply are within 1/4 " of yours

*************************
Regards
Colin Evans
Watermark 
2000 C320 # 774 
Lake Macquarie, Australia
 

-----Original Message-----
From: c320-list-bounces at lists.catalina320.com
[mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Monkey Mail
Sent: Monday, 4 February 2013 2:06 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Crib board dimensions

Good evening David,

I happen to have my boards sitting on the patio table nearly half way thru
the Interlux perfection plus rehab. Three coats applied thus far and the
look absolutely fantastic. 

The dimensions are as follows:

Top of upper board = 31 1/4"
Bottom of upper / top of middle board: = 29 1/2"
Bottom of middle / top of lower board: = 27 1/2"
Bottom of lower board = 25 1/2"

Height = 19 5/8"

Good luck,
 
Lou Hodac
S/V Blue Moon
Hull# 702


Sent from my iPad

On Feb 3, 2013, at 11:29 AM, dprudden <dprudden at comcast.net> wrote:

> Does anyone know the dimensions of the companionway, or more specifically,
the crib board overall dimensions? I need to make a temporary crib board or
single piece of plywood so i can remove and refinish my crib boards (i don't
like Cetol-varnish looks so
> much better) and my boat is covered and an hour away.
> 
> Thanks,
> David Prudden
> #787