[C320-list] Locating new thru-hull for A/C

[Warren Updike]

Thanks, Ken.  I, too, have an available thru-hull as we don't flush with sea
water.  I'm wondering how you routed the hose back to the A/C.  That's the
mystery I can't solve.  

Warren & Pattie Updike
1994 C320 #62 "Warr De Mar"

-----Original Message-----
From: Jane & Ken [mailto:obuoy4848 at sbcglobal.net] 
Sent: Monday, February 04, 2013 12:56 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Locating new thru-hull for A/C

Warren,  On my former hull #219 I used the existing hole that fed the head. 
I placed a  Tee on the thru hull and ran the hose to a cut-off then to the
a/c.  Worked fine for the reverse cycle heat/air unit.  I installed the
compressor in the starboard lazzerett.  Ken

--- On Mon, 2/4/13, Warren Updike <wupdike at hotmail.com> wrote:

From: Warren Updike <wupdike at hotmail.com>
Subject: [C320-list] Locating new thru-hull for A/C
To: C320-List at Catalina320.com
Date: Monday, February 4, 2013, 11:43 AM

I'd like to hear from anyone with a '93-'95 hull about locating a new
thru-hull for A/C in the shaft alley and the strainer/scoop you may have
used on the hull.

 

The alley in these older models don't have near the room the later models
have.  However, I'd like to not clutter up the area by the packing nut as it
is already a b(*&^ to drain the primary fuel filter.  A typical boat
conundrum.  

 

Warren Updike

Towson, MD

410-821-8246