[C320-list] Shower pump
Bruce Heyman
bruceheyman at cox.net
Wed Feb 6 09:50:27 PST 2013
Any air leak, regardless of how small, will make it tough for a prime. I've had problems with the strainer and getting an air tight fit in the past.
Good luck!
Bruce
Bruce Heyman
(949) 289-8400
Jerry Brown <jbrown03 at sympatico.ca> wrote:
>Hi
>
>On Hull 925 when I owned it, I had to clean the filter and prime at the
>beginning of each season by setting the valve to the shower drain position
>and then pushing a hose onto the shower drain and forcing water up to the
>pump as it would not self prime. Once it had been primed at the beginning
>of the season it seemed to hold the prime till the fall haul out. If it
>stopped working I just repeated.
>
>Regards
>
>Jerry Brown
>1137 Indigo (on Lake Ontario)
>
>-----Original Message-----
>From: twosailors at bigpond.com
>Sent: Wednesday, February 06, 2013 1:01 AM
>To: C320-List at Catalina320.com
>Subject: Re: [C320-list] Shower pump
>
>At the risk of stating the obvious, I assume you have the sink head inlet
>open, as I believe it is also the shower outlet . Also the Y valve dictates
>whether you pump the fridge or shower sump.
>Colin Evans #774
>Australia.
>Sent from my
>reasonably smart phone
>
>----- Reply message -----
>From: "Tim Fleming" <timfleming at hotmail.com>
>To: "c320-list at lists.catalina320.com" <c320-list at lists.catalina320.com>
>Subject: [C320-list] Shower pump
>Date: Wed, Feb 6, 2013 4:43 pm
>
>
>
>Shower/fridge pump not sucking. Checked all the hoses. Blowing and sucking.
>Took the Jabasco apart now 4 times and still now success. Motor works &
>it's clean so I'm lost. Think some aquarium pumps would work better than
>this thing.... Arghhh I read previous posts but believe its the pump but
>all the valves and diaphragms check out like new. Suggestions?
>
>Tim #928
>
More information about the C320-list
mailing list