[C320-list] Jib Double Sheet Turning Block

[Dick Walker]

Yes I now recall

They have a replacement that you can order and that work fine
Mine were prototypes , give them a call

Sorry for the error.  I embed did know the part number



Cheers

Dick Walker
740 Olive Ave.
Coronado ,CA 92118
619.435.8986



On Jun 27, 2013, at 19:57, Tony Murphy <tony at midwestphysics.com> wrote:

> Jeff,
> 
> I don't want to speak for Dick (but I'll take a stab at it anyway).
> 
> I read his answer "not that I know of" to the question that Bruce asked, which was "wondering if he assigned a part number to it?". 
> 
> Maybe his memory isn't as bad as you're thinking...
> 
> 
> Tony Murphy
> Bella Sol #886
> 
> 
> On Jun 27, 2013, at 7:28 PM, "Jeff Hare" <catalina at thehares.com> wrote:
> 
>> Dick, 
>> 
>> Garhauer made you a Roller bearing replacement for the stock Lewmar Genoa
>> Turning blocks back in 2007.
>> 
>> Granted they weren't Stainless, they were milled Aluminum with nice turny
>> things inside for your genoa sheets.  :)
>> 
>> I *saw* them with my own two eyeballs at the Coronado Regatta when I was
>> sitting on your boat sipping a cold bottle of Negra Modelo beer and playing
>> with Winston.  Now granted my memory is mostly shot these days, but these
>> have been on my list ever since...
>> 
>> Remember now?
>> 
>> -Jeff Hare
>> 
>> -----Original Message-----
>> From: c320-list-bounces at lists.catalina320.com
>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Dick Walker
>> Sent: Wednesday, June 26, 2013 11:58 PM
>> To: C320-List at Catalina320.com
>> Subject: Re: [C320-list] Jib Double Sheet Turning Block
>> 
>> Not that I know of
>> 
>> -----Original Message-----
>> From: c320-list-bounces at lists.catalina320.com
>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Bruce Heyman
>> Sent: Wednesday, June 26, 2013 5:02 PM
>> To: C320-List at Catalina320.com
>> Subject: [C320-list] Jib Double Sheet Turning Block
>> 
>> Dick Walker,
>> 
>> If my memory serves me well I seem to remember you talking Garhauer into
>> making a jib SS double sheet turning block for the 320.  I'm ready to do
>> that upgrade and was wondering if he assigned a part number to it?
>> 
>> Thanks!
>> 
>> Bruce
>> 
>> 
>> 
>> Bruce Heyman
>> 
>> (949) 289-8400
>> 
>> bruceheyman at cox.net
>