[C320-list] Jib Double Sheet Turning Block

[Tony Murphy]

There goes my theory!!  Oh well…  gotta stop giving so much benefit of the doubt!!

Tony


On Jun 27, 2013, at 10:30 PM, Dick Walker <dickwalker at att.net> wrote:

> Yes I now recall
> 
> They have a replacement that you can order and that work fine
> Mine were prototypes , give them a call
> 
> Sorry for the error.  I embed did know the part number
> 
> 
> 
> Cheers
> 
> Dick Walker
> 740 Olive Ave.
> Coronado ,CA 92118
> 619.435.8986
> 
> 
> 
> On Jun 27, 2013, at 19:57, Tony Murphy <tony at midwestphysics.com> wrote:
> 
>> Jeff,
>> 
>> I don't want to speak for Dick (but I'll take a stab at it anyway).
>> 
>> I read his answer "not that I know of" to the question that Bruce asked, which was "wondering if he assigned a part number to it?". 
>> 
>> Maybe his memory isn't as bad as you're thinking...
>> 
>> 
>> Tony Murphy
>> Bella Sol #886
>> 
>> 
>> On Jun 27, 2013, at 7:28 PM, "Jeff Hare" <catalina at thehares.com> wrote:
>> 
>>> Dick, 
>>> 
>>> Garhauer made you a Roller bearing replacement for the stock Lewmar Genoa
>>> Turning blocks back in 2007.
>>> 
>>> Granted they weren't Stainless, they were milled Aluminum with nice turny
>>> things inside for your genoa sheets.  :)
>>> 
>>> I *saw* them with my own two eyeballs at the Coronado Regatta when I was
>>> sitting on your boat sipping a cold bottle of Negra Modelo beer and playing
>>> with Winston.  Now granted my memory is mostly shot these days, but these
>>> have been on my list ever since...
>>> 
>>> Remember now?
>>> 
>>> -Jeff Hare
>>> 
>>> -----Original Message-----
>>> From: c320-list-bounces at lists.catalina320.com
>>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Dick Walker
>>> Sent: Wednesday, June 26, 2013 11:58 PM
>>> To: C320-List at Catalina320.com
>>> Subject: Re: [C320-list] Jib Double Sheet Turning Block
>>> 
>>> Not that I know of
>>> 
>>> -----Original Message-----
>>> From: c320-list-bounces at lists.catalina320.com
>>> [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Bruce Heyman
>>> Sent: Wednesday, June 26, 2013 5:02 PM
>>> To: C320-List at Catalina320.com
>>> Subject: [C320-list] Jib Double Sheet Turning Block
>>> 
>>> Dick Walker,
>>> 
>>> If my memory serves me well I seem to remember you talking Garhauer into
>>> making a jib SS double sheet turning block for the 320.  I'm ready to do
>>> that upgrade and was wondering if he assigned a part number to it?
>>> 
>>> Thanks!
>>> 
>>> Bruce
>>> 
>>> 
>>> 
>>> Bruce Heyman
>>> 
>>> (949) 289-8400
>>> 
>>> bruceheyman at cox.net
>>