[C320-list] cleat at midships

[JJ Morrison]

You don't need the measurements. Garhauer make these all the time and all you need to do is tell them where they're for.CheersJohnM1999#574

> From: resloat at comcast.net
> Date: Mon, 11 Aug 2014 09:01:16 -0500
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] cleat at midships
> 
> If your model has tracks on the cabin top and you want to use track cleats there you may need a cleat with a shorter base length.  On hull 894 the standard Garhauer cleats are too long to fit on the cabin top tracks.  I had the Garhauer folks make up a set of cleats that were shortened to fit on the cabin top.  Now have cleats for the deck tracks and the cabin top tracks for flexibility.  The cabin top cleats were great for fastening the lines coming out of the spinnaker sock when the sock was raised.  I am not at the boat so don’t have the length for the cabin top application.
> 
> On Aug 9, 2014, at 10:07 AM, JJ Morrison <sail-ability at sympatico.ca> wrote:
> 
> > I purchased 4 track cleats from Garhauer and as I recall they were around $40 each.CheersJohnM1999#574
> > 
> >> From: baeyoung at telus.net
> >> Date: Fri, 8 Aug 2014 16:01:16 -0700
> >> To: C320-List at Catalina320.com
> >> Subject: Re: [C320-list] cleat at midships
> >> 
> >> Thanks to everyone for the midship cleat suggestions. We discovered that Catalina Direct sells a reasonably priced track cleat (less than 100.00) for the 320 so we are going with that.  Bronwen and Eric  FanaSea #198, 1995.
> > 		 	   		  
> 
> Bob Sloat
> Savannah 894 (2002)
> Waukegan Harbor, IL
>