[C320-list] CAT 320 LIST: Gas Lifts, port cockpit main locker cover

[Greg Flanagan]

I'm #1726 and don't have them.  But am interested.

Thanks,
 
Greg

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of wflowe3 at aim.com
Sent: Tuesday, July 15, 2014 6:57 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] CAT 320 LIST: Gas Lifts, port cockpit main locker
cover


 I'm #1146 and don't have them

 

 

-----Original Message-----
From: Denny Browne <dennybrowne at verizon.net>
To: C320-List <C320-List at Catalina320.com>
Sent: Mon, Jul 14, 2014 9:13 pm
Subject: Re: [C320-list] CAT 320 LIST: Gas Lifts, port cockpit main locker
cover


I have #935 and wish I had them. Also wish I had them on both fridge lids
(already put hinges on the back lid).

Denny Browne
A Cappella #935
Redondo Beach

Sent from iPhone, sorry for typos, grammar, etc...

> On Jul 14, 2014, at 4:27 PM, Martin Rosenberg 
> <martinlrosenberg at gmail.com>
wrote:
> 
> I have a 2001 Hull# 823 and I don't have them.
> Martin
>> On Jul 14, 2014 5:32 PM, "MSail" <msail at baymoon.com> wrote:
>> 
>> I want to install gas lifts to hold up the port cockpit cover (hinged 
>> seat lid).  I'm planning on using the Associated Spring Raymond SPI 
>> Model
>> GSNI-2300-40 (40 lbs, 12" compressed, 8 inch stroke, 2 each ) gas 
>> lifts which are, I think, the same as the Catalina factory uses.
>> 
>> I have Hull #324, 1996.  Later C320's apparently include these gas 
>> lifts from the factory.
>> 
>> Before I start drilling holes in the cockpit locker cover/seat, can 
>> someone who has these installed give me an accurate measurement on 
>> the correct position of the mounting holes for the brackets in the 
>> locker cover (referred to the top edge and side edge of the cover or 
>> some other reference point?  And/or photos of the installed units?
>> 
>> Thank you.
>> 
>> Michael  Mellon
>> msail at baymoon.com
>> LaVida #324 Santa Cruz, CA
>> 
>> 
>>