[C320-list] CAT 320 LIST: Gas Lifts, port cockpit main locker cover

[Irving Grunes]

Any gas lift for the port locker must have been by a private owner

2001 #851 does not have them.

Irv


On Tue, Jul 15, 2014 at 9:57 AM, <wflowe3 at aim.com> wrote:

>
>  I'm #1146 and don't have them
>
>
>
>
>
> -----Original Message-----
> From: Denny Browne <dennybrowne at verizon.net>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Mon, Jul 14, 2014 9:13 pm
> Subject: Re: [C320-list] CAT 320 LIST: Gas Lifts, port cockpit main locker
> cover
>
>
> I have #935 and wish I had them. Also wish I had them on both fridge lids
> (already put hinges on the back lid).
>
> Denny Browne
> A Cappella #935
> Redondo Beach
>
> Sent from iPhone, sorry for typos, grammar, etc...
>
> > On Jul 14, 2014, at 4:27 PM, Martin Rosenberg <
> martinlrosenberg at gmail.com>
> wrote:
> >
> > I have a 2001 Hull# 823 and I don't have them.
> > Martin
> >> On Jul 14, 2014 5:32 PM, "MSail" <msail at baymoon.com> wrote:
> >>
> >> I want to install gas lifts to hold up the port cockpit cover (hinged
> seat
> >> lid).  I'm planning on using the Associated Spring Raymond SPI Model
> >> GSNI-2300-40 (40 lbs, 12" compressed, 8 inch stroke, 2 each ) gas lifts
> >> which are, I think, the same as the Catalina factory uses.
> >>
> >> I have Hull #324, 1996.  Later C320's apparently include these gas lifts
> >> from the factory.
> >>
> >> Before I start drilling holes in the cockpit locker cover/seat, can
> >> someone who has these installed give me an accurate measurement on the
> >> correct position of the mounting holes for the brackets in the locker
> cover
> >> (referred to the top edge and side edge of the cover or some other
> >> reference point?  And/or photos of the installed units?
> >>
> >> Thank you.
> >>
> >> Michael  Mellon
> >> msail at baymoon.com
> >> LaVida #324 Santa Cruz, CA
> >>
> >>
> >>
>
>
>