[C320-list] Holding Tank matters

[Warren Updike]

Joe, Elizabeth, whoever, on our #62 we replaced the original holding tank
with a 22 gal. Ronco B348 tank. I have an article and a number of pictures.
One shows the location of the thru-hull in relation to the tank. Removing
the tank requires cutting the old hoses close to the fittings, plugging the
open hoses, and rotating the tank from the outboard end up before you can
lift the tank out. The new tank went in, in opposite fashion. This was not
the most difficult project I’ve done; but, it is a lot of work. Time and
patience are necessary.

E-mail me off-list and I’ll send the article and pictures.

 

Warren and Pattie Updike

1994 C320 "Warr de Mar" #62

 

From: Elizabeth Schwartz

Sent: ‎Friday‎, ‎March‎ ‎21‎, ‎2014 ‎12‎:‎27‎ ‎PM

To: 320

Cc: 320

Thanks.....I'm aware of the general location. If the holding tank needs 

to be removed for any reason, the stem of the thru hull may impact that 

process, if put in the way. I'm trying to decide if it should 

go outboard of the holding tank, or forward of the right side close to 

battery location.......Thanks....Joe

>> On Mar 21, 2014, at 5:43, Elizabeth Schwartz  wrote:

>> 

>> ahoy all.....I'm new to the C 320 group. Recently purchased 1995 hull 

>> #245. Can someone send me a photo of the location of the holding tank 

>> macerator discharge thru hull, that best allows for holding tank 

>> removal if necessary?  Also, has anyone drilled out weep holes in the 

>> "hollow" floor grid structure? Thanks.....Joe