[C320-list] Aqualift mufler

[Millers]

My muffler is screwed down at the four corners.  The drilled holes in the muffler base were a source of leaks. 
Also between the engine and muffler one can install a " hump hose" (Defenders) to de-stress the muffler connection.  
Art. # 680

Sent from my iPhone

> On May 9, 2014, at 4:47 PM, "WINDER & KIRONDE" <wcwinder at comcast.net> wrote:
> 
> Especially because it is so difficult to get the muffler out you
> should make sure that the joint around the outflow pipe is not
> leaking. Getting it out usually puts a lot of stress on this joint. I
> thought my muffler was leaking around the bottom flange but it was
> only around the outflow pipe which extends thru to the bottom of the
> muffler.  If you pressurize the tank with a little water in it you
> should hear and see bubbles and air coming out through the leaks.  My
> mechanic recommended using rubber flex hose exhaust pipe to connect
> the muffler to the engine which is so close and what makes it so
> difficult to remove the muffler.
> 
> Bill Winder
> INDIGO #97
> Winthrop MA
> 
>