[C320-list] Tension settings for shrouds

[Allan S Field]

I had a rigger from Annapolis come down to do some work and while there,
asked him to tune the rig.  These are the specs he used, using the
Association Loos gauges.

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of tharrison at innovations-plus.com
Sent: Monday, May 12, 2014 4:43 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Tension settings for shrouds

Why the three settings. Sorry if it is a stupid question. I am just
learning. 

Ted

Sent from my iPhone

> On May 12, 2014, at 4:38 PM, "Allan S Field" <allan.field at verizon.net>
wrote:
> 
> Following is what I went with on Sea Shadow:
> 
> 
> STAY    PER YEAGER    STARBOARD    PORT 
> Cap    PT3 - 18    23    23
> D1 Fwd    PT2 - 31    36    36
> D1 Aft    PT2 - 16    29    28
> D2    PT2 - 18.5    31    32
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf Of tharrison at innovations-plus.com
> Sent: Monday, May 12, 2014 4:15 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Tension settings for shrouds
> 
> Allan, thanks for the reply. I found the below settings. But he 
> changed the forestay and added a backstay adjuster. Are the setting below
correct?
> 
> Cap stays-PT-3 gauge18
> D1 forward stays-PT-2 gauge 31
> D1 aft stays-PT-2 gauge 16
> D2 stays-PT-2 gauge 18.5
> 
> Ted
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf Of Allan S Field
> Sent: May-12-14 3:54 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Tension settings for shrouds
> 
> See:  http://www.catalina320.com/article.php?story=20040828173431380
> 
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf Of tharrison at innovations-plus.com
> Sent: Monday, May 12, 2014 3:22 PM
> To: c320-list at lists.catalina320.com
> Subject: [C320-list] Tension settings for shrouds
> 
> Does anyone have the tension setting for the shrouds?
> 
> 
> 
> Ted - Magic Moment, Hull 424
> 
>