[C320-list] Mascerator
Elizabeth Schwartz
schwartz781 at optonline.net
Tue Oct 14 10:29:27 PDT 2014
Ahoy....I am just getting around to install a macerator in #245, that I
have had for 1 year. I plan to only use it when pump out facility is not
available, I am planning on installing the power switch near the
macerator and the thu hull just forward of the holding tank. As I plan
to only open the thru hull when pumping overboard, I am not planning on
installing a vented loop. Do you folks have a vented loop in this line?
Thanks.....Joe
On Tue, Oct 14, 2014 at 11:44 AM, Bronwen Young wrote:
> Our macerator was seized when we bought our boat in 2012 (built in
> 1995). I replaced it. Fairly easy to do.
> This Spring, 2014, it stopped evacuating the holding tank. I took it
> out and brought it home. I needed to remove
> some fibrous material and a fair number of hairs from its metal plate
> and choppers. Then I checked it in a bucket.
> It very nicely shot a whole bunch of water into a second bucket.
>
> Moral: they may run for years, but they may need to be cleaned every
> once in a while.
>
> Hope this helps. Oh, when you are retightening the hose clamps,
> finish off with a socket set. Just using a
> screwdriver won’t get them tight enough.
>
> Eric and Bronwen
> FanaSea #198
More information about the C320-list
mailing list