[C320-list] Zinc

[Allan S Field]

You still need a zinc on the prop shaft.  As a "belt and suspenders" guy, I
use 2 zincs on the shaft.

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of colloua5 at aol.com
Sent: Wednesday, September 24, 2014 6:41 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Zinc




.Hi Allen


Does this mean the prop shaft as well or only the rear of the motor as you
described


Lou Reszoly  # 427



-----Original Message-----
From: Allan S Field <allan.field at verizon.net>
To: C320-List <C320-List at Catalina320.com>
Sent: Tue, Sep 23, 2014 9:42 pm
Subject: Re: [C320-list] Zinc


The 3GM30F Yanmar's don't have engine zincs.  At the rear of the motor,
above the transmission, you will see a plate where the zinc used to go.  If
you doubt this, feel free to call Mack Boring at 908-964-0700.  These guys
are the Yanmar experts.

Allan S. Field
Sea Shadow - 808
Columbia, MD

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of Joseph R Aberdale
Sent: Tuesday, September 23, 2014 8:41 PM
To: C320-List at Catalina320.com
Subject: [C320-list] Zinc

Page 40 of the engine manual for my Yanmar 3GM30F, serial number E28782,
talks about replacement of the Anticorrosion Zinc on the engine. However, it
does not show the location of it in the engine diagram picture. I would
appreciate it if someone could help me locate it.

Thank you.

Joe Aberdale
Morning Star
#908