[C320-list] Zinc

[Elizabeth Schwartz]

Ahoy.....dont forget the zinc on the heat exchanger......Joe....#245


On Wed, Sep 24, 2014 at 07:08 AM, Allan S Field wrote:

> You still need a zinc on the prop shaft.  As a "belt and suspenders" 
> guy, I
> use 2 zincs on the shaft.
>
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf
> Of colloua5 at aol.com
> Sent: Wednesday, September 24, 2014 6:41 AM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Zinc
>
>
>
>
> .Hi Allen
>
>
> Does this mean the prop shaft as well or only the rear of the motor as 
> you
> described
>
>
> Lou Reszoly  # 427
>
>
>
> -----Original Message-----
> From: Allan S Field To: C320-List Sent: Tue, Sep 23, 2014 9:42 pm
> Subject: Re: [C320-list] Zinc
>
>
> The 3GM30F Yanmar's don't have engine zincs.  At the rear of the 
> motor,
> above the transmission, you will see a plate where the zinc used to 
> go.  If
> you doubt this, feel free to call Mack Boring at 908-964-0700.  These 
> guys
> are the Yanmar experts.
>
> Allan S. Field
> Sea Shadow - 808
> Columbia, MD
>
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf
> Of Joseph R Aberdale
> Sent: Tuesday, September 23, 2014 8:41 PM
> To: C320-List at Catalina320.com
> Subject: [C320-list] Zinc
>
> Page 40 of the engine manual for my Yanmar 3GM30F, serial number 
> E28782,
> talks about replacement of the Anticorrosion Zinc on the engine. 
> However, it
> does not show the location of it in the engine diagram picture. I 
> would
> appreciate it if someone could help me locate it.
>
> Thank you.
>
> Joe Aberdale
> Morning Star
> #908
>
>
>
>