[C320-list] Rebedding of traveler track

[Irving Grunes]

I was not able to do that with a moveable genoa car.
Had to send back to Garhauer
Irv Grunes
Former #851

On Thu, Apr 23, 2015 at 12:31 PM, jim brown <jbrown5093 at yahoo.com> wrote:

> I agree with Chris. Garhauer is very responsive and great to deal with.
> Don't know if this will help but when I got adjustable jib cars from
> Garhauer  the car came on a short piece of track with instructions and
> warnings all over not to remove the car from the track. You simply  remove
> the tape stopper and butt the end of the short track to the jib track and
> slide the block off and onto the jib track. They are also careful to tell
> you to save the short piece and remove in the reverse order. Could you put
> the bearings in the car on a short piece of track and slide the whole thing
> on to the traveler track?
> Jim Brown
>
>       From: Chris Burti <clburti at gmail.com>
>  To: 320 <C320-List at catalina320.com>
>  Sent: Thursday, April 23, 2015 11:41 AM
>  Subject: Re: [C320-list] Rebedding of traveler track
>
> David, contact Garhauer Marine, they will assist you.
>
> *www.garhauermarine*.com
>
>
>
> On Thu, Apr 23, 2015 at 11:01 AM, Lynda Rath <lkusnetz at gmail.com> wrote:
>
> > This was sent last week but we haven't seen it addressed...resending.
> >
> >
> > Hello All:
> >
> > During the process of rebedding the traveler track and replacing the
> line,
> > I removed the traveler car only to find myself in the middle of a swarm
> of
> > plastic BBs as they fell out of the traveler car and bounced all over my
> > deck. Is it time to buy a new traveler, or is there some magic trick used
> > to get all of the BBs back in place and reinstall the traveler car back
> > onto the track?
> >
> >
> >
> > Best,
> >
> > David Rath
> >
> > Sugar #661
> >
> > Greenport, NY
> >
>
>
>
> --
> Chris Burti
> Farmville, NC
>
>
>
>