[C320-list] Traveler Mounting Screws

[Warren Updike]

On #62, the turning blocks are secured with an imbedded plate. I suspect the clutches and traveler are as well as I don't see any nuts on the inside. Some stanchions are relatively easy to access, others while others are a bitch. I've dealt with nearly all the stanchions.

Warren and Pattie Updike
1994 C320 "Warr de Mar" #62

-----Original Message-----
From: clburti at gmail.com [mailto:clburti at gmail.com] 
Sent: Thursday, July 16, 2015 10:41 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Traveler Mounting Screws

#867 has threaded holes in the embedded aluminum plate for the traveler,  clutches and turning blocks. I don’t know if that design started with hull #1 or was a  later production mod. I do know that every piece of through bolted deck hardware on #867 is easily accessible except the stanchions and they can be accessed without unreasonable difficulty.






Best Regards,
Chris Burti





From: Larry Frank
Sent: ‎Thursday‎, ‎July‎ ‎16‎, ‎2015 ‎9‎:‎54‎ ‎PM
To: C320-List at catalina320.com





No responses which is strange for this group.  Let me try again.  Can
anyone answer my question regarding the mounting screws for the traveler?

Larry

On 7/13/15, 9:19 PM, "Larry Frank" <WindSwept at stx.rr.com> wrote:

>Are these screws secured by an aluminum plate that is laid up in the
>fiberglass coach roof or are they secured by the nuts that extend all the
>way through the liner?
>
>Thanks,
>
>Larry 
>WindSwept
>#230 #246
>
>