[C320-list] Fwd: Wheel Steering Safety Notice

[Bill Lowe]

 Wouldn't it be cheaper to change the bolts to steel and put a piece of plastic milk jug between the steel mounting plate and the aluminum pedestal?


-----Original Message-----
From: Allan S Field <allan.field at verizon.net>
To: C320-List <C320-List at Catalina320.com>
Sent: Fri, Jul 24, 2015 8:01 am
Subject: Re: [C320-list] Fwd: Wheel Steering Safety Notice

 
 
 
I got this also.  So Catalina/Edson didn't know about dissimilar metals back  
then?!?!?!  Replacement part is $359 plus shipping.  Note their warning: "  
Failure of this part would be disastrous, as it would compromise control of your  
boat."  Disastrous is a pretty strong term.  If it was a car, we'd be protected  
by a product recall...  In my case, it will be parts plus install as since my  
knee replacement, I know that I would not be able to do this work myself.   
 
Allan S. Field 
Sea Shadow - #808 
Columbia, MD 
 
-----Original Message----- 
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of  
tharrison at innovations-plus.com 
Sent: Friday, July 24, 2015 4:11 AM 
To: C320-List at Catalina320.com 
Subject: [C320-list] Fwd: Wheel Steering Safety Notice 
 
FYI folks  
 
Sent from my iPhone 
 
Begin forwarded message: 
 
> From: Catalina Direct <cd3 at catalinadirect.com> 
> Date: July 23, 2015 at 11:25:42 PM EDT 
> To: Ted <tharrison at innovations-plus.com> 
> Subject: Wheel Steering Safety Notice 
> Reply-To: Catalina Direct <cd3 at catalinadirect.com> 
>  
>  
> If your boat was built with a stock mild steel bracket, please consider making  
the upgrade to one of our stronger, safer aluminum replacements.  
> Is this email not displaying correctly? 
> View it in your browser. 
>  
> Cross Wire Idler 
>   
>  
> The thin mild steel plate can corrode to the point of failure. 
>   
> Form vs. Function 
> Many of the parts we carry are impressive in both form and function. They help  
your boat operate smoothly and look great at the same time. However, we also  
carry parts that are hidden from view but which are absolutely essential to the  
functioning of your boat. 
>   
>  
> Though seldom seen, the cross wire idler is vital to the steering of  
> your boat 
>   
> A Hidden Workhorse 
> The adjustable cross wire idler is one of the latter. It is mounted underneath  
the steering pedestal which means it is seldom thought of and almost never seen.  
However, this part is vital to your steering assembly. It leads your steering  
cable from its vertical run within the pedestal to a horizontal run under the  
cockpit, then aft to the radial drive wheel on the rudder shaft (see drawing  
below). Failure of this part would be disastrous, as it would compromise control  
of your boat. 
>  
> The factory supplied assembly had a mounting frame fabricated from mild steel.  
This steel assembly was attached to the aluminum pedestal with aluminum mounting  
bolts. This combination of dissimilar metals led to serious corrosion of all of  
the components, making them weaker and more prone to failure.  
>   
>  
> The cross wire idler (highlighted in blue) is mounted beneath the  
> pedestal 
>   
> Robust Replacement 
> Depending upon which Catalina model you own, we have several different  
retrofit parts available that fix this problem. They replace the mild steel  
plate with a machined aluminum frame that is compatible with the other aluminum  
components of the system. This eliminates galvanic corrosion keeping your  
steering assembly strong and reliable even in the most violent of seas. 
>  
> We highly recommend this upgrade to protect you against the sudden loss of  
steering. The most important time to have reliable steering is in times of high  
stress. Unfortunately it is during these times that the corroded plate on your  
original assembly is most likely to fail. The old mild steel design was used on  
the Catalina 27, Catalina 270, Catalina 310, Catalina 320, Catalina 34, Catalina  
36, and Catalina 42.  
>  
> Depending upon your model choose one of the three different cross wire idler  
assemblies we offer. For the Catalina 27 (when equipped with an inboard engine),  
Catalina 270, 310, 320, 34 and 36, choose #Z3102. If you own a Catalina 28 or  
30, explore additional detailed information found here. For Catalina 42 owners,  
choose #T2007. 
>  
> If your boat was built with a stock mild steel bracket, please consider making  
the upgrade to one of our stronger, safer aluminum replacements.  
>  
> To make this peace-of-mind upgrade today, call our staff at 1-800-959-7245, or  
visit our website at www.catalinadirect.com. 
>   
>  
>  
>  follow on Twitter | friend on Facebook | forward to a friend  
> Copyright © 2015 Catalina Direct, All rights reserved. 
> You are receiving this email because you opted in at our website or over the  
phone.  
> Our mailing address is:  
> Catalina Direct 
> 10210 Systems Pkwy #390 
> Sacramento, Ca 95827 
>  
> Add us to your address book 
>  unsubscribe from this list | update subscription preferences 
>