[C320-list] Deck changes

[Doug Treff]

Another email from the Warren P. at the factory, with clarified 
information:

> If your 320 is a 1996, it is very unlikely that that you
> would have to do any cutting or re-drilling. Reason being
> is that even if there was any wood at or near the chainplate,
> any moisture would not egress in very far which means virutally
> right angle tool, even an allen wrench would clear any affected
> area and then the solid filler could be pressed in thru the
> existing slot as well. The light weight stiffening core is not
> a plank form as other mfgr's use in the 70's or early 80's. They
> are small squares and will have resin on all 4 sides which
> isolates and prevents moisture travel.


---
Doug Treff
doug at treff.us