[C320-list] sizes of companionway hatch slides

[Graeme Clark]

That is definitely true. I made a temporary single piece board for my previous (shared)  320 so I could re-finsih the boards over winter. When I bought my own 320 I tried the same piece of board and it didnt quite fit -  needed shaving down a bit!

Graeme

On 22 Nov 2015, at 20:41, Scott Thompson <surprise at thompson87.com> wrote:

> When I purchased my hatch screens I was warned that there are small differences between individual boats that can affect the fit.
> 
>> On Nov 22, 2015, at 2:21 PM, John Meyers <jcmeyers7 at gmail.com> wrote:
>> 
>> I am not at my boat but do happen to have my hatches home to refinish
>> myself while there are 1/4 inch plywood ones on the boat.
>> 
>> The extreme highth is 28.25 inches (tapered at the top and bottom)
>> Bottom width is 25.75 inches
>> Top width is 31 inches
>> 
>> John Meyers
>> #406 1997
>> Wind Chime
>> 
>>> On Sun, Nov 22, 2015 at 9:57 AM, Louis Spitz <aronella at gmail.com> wrote:
>>> 
>>> Can anyone give me the dimension(s) of the wooden companionway hatch
>>> boards,or the dimensions of the opening? I am at a distance from my boat,
>>> and want to make plywood substitutes so I can take the originals off the
>>> boat to refinish over the winter.
>>> Thanks,
>>> Lou Spitz #195 Merry Chase