[C320-list] Salon Table Pedestal

[Jeff Hare]

www.GreatLakesSkipper.com carries this brand in a few different sizes from
Taco Metals in "Cabin and galley"  section under "Tables & Accessories"

-Jeff

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of Doug Treff
Sent: Friday, October 16, 2015 3:32 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Salon Table Pedestal

 

Another option is this - found in the Catalina 30 support forum: 

The US supplier of the Zwaardavis parts is TACO Metals in Miami.
(http://www.tacometals.com/) 

Their customer service department will probably steer you to West Marine
Special Orders (888-888-3221), as TACO doesn't do retail sales. If you
contact West, specify the product as being a TACO Metals listing, as that's
how they have them cataloged. Not sure if West Marine can cross-reference
the Catalina specific part without dimensions or a part number as they make
a wide variety of parts for many yacht manufacturers.

---
Doug Treff
Catalina 320 - 1996 - September Song - #350 http://savvysailor.blogspot.com/
doug at treff.us

On 2015-10-16 13:11, Jeff Hare wrote: 

> Martin,
> 
> Search google for: "zwaardvis table parts"
> 
> Ebay has a listing out of Racine, Wisconsin for just the pedestal post for
179 with free shipping.
> Here's the short link: http://r.ebay.com/XgzDUa [1]
> 
> Didn't verify anything specifically about the dimensions, but I would
think you can do better than $500...
> 
> -Jeff Hare
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf Of Martin Rosenberg
> Sent: Friday, October 16, 2015 10:32 AM
> To: C320-List at catalina320.com
> Subject: Re: [C320-list] Salon Table Pedestal
> 
> Currently, Catalina Direct lists the complete unit (including both
flanges) for $443.95 plus shipping and tax. The flanges separately are
108.95 each.
> I've been researching Zwaardvis but I haven't been able to find a U.S.
> location for them and ordering from the Netherlands probably isn't worth
it. Catalina Direct told me they could get it ordered, custom made, and
delivered to me in about a week so they are definitely sourcing in
regionally if not locally.
> Since I have the boat for sale, I want it to be right and as close to
original as I can get it. It looks like I'm just going to have to give in to
Catalina Direct and order the whole thing.
> Martin
> 
> On Fri, Oct 16, 2015 at 9:49 AM, Ade Bateman <lists at adrianba.net> wrote:
> I recently replaced the pedestal for the table in my 1995 C320 last 
> December. I ordered the silver version of the pedestal (Z3433) from 
> Catalina Direct (which they were still selling although it isn't 
> listed separately on the site any more). 
> http://www.catalinadirect.com/index.cfm/product/2014/table-pedestal-wg 
> [2] as-spring.cfm The pedestal is equivalent to the Forespar one ( 
> http://www.forespar.com/products/boat-table-pedestal.shtml [3]) but 
> considerably cheaper (presumably because it is made by the company 
> Graeme mentions?) than I could find anywhere else (although it looks 
> like the price is $100 more than a year ago). Perhaps Forespar would 
> sell just the gas lift. The flange at the bottom was slightly smaller 
> on the replacement than the original and they attached to the lift 
> with screws, which my original didn't have, so that might be why they 
> only sell it as a complete unit. The good news is that now I don't 
> spill my coffee on a wobbly table! It was a relatively expens
 ive
replacement but I'm glad I did it. Cheers, Ade. -----Original Message-----
From: Graeme Clark Sent: Friday, October 16, 2015 1:29 AM To:
C320-List at Catalina320.com Subject: Re: [C320-list] Salon Table Pedestal They
are made by a cmpany called Zwaardvis; not sure from where you can buy the
parts but that and Google might get you started! Graeme On 16 Oct 2015, at
04:27, Martin Rosenberg <martinlrosenberg at gmail.com> wrote: The inside of
the pedestal from my salon table rotted out. While it answered my concern
about why I couldn't adjust it's height, it also presented me with an
expensive (relatively) problem. Catalina Direct says the only way they know
how to order it is 'complete' but I really don't need the upper and lower
flanges. Mine are perfect and the are HALF the cost of the complete unit.
Interestingly enough, they do allow you to order only the flanges. They tell
me that they order it so I'm wondering if any of you might know WHERE it is
ordered from. It's made to orde  r and NOT by Catalina Direct. Thanks.
Martin Rosenberg 2001 Avalon #823
 

Links:
------
[1] http://r.ebay.com/XgzDUa
[2]
http://www.catalinadirect.com/index.cfm/product/2014/table-pedestal-wg
[3] http://www.forespar.com/products/boat-table-pedestal.shtml