[C320-list] Relocate Engine Thur-Hull
Chris Burti
clburti at gmail.com
Thu Sep 17 17:41:52 PDT 2015
Tony,
Just put a six inch inspection plate forward of the Racor filter.
Thanks,
Chris Burti
-----Original Message-----
From: "Michael Rauh" <raceannouncer at verizon.net>
Sent: 9/17/2015 5:19 PM
To: "C320-List at Catalina320.com" <C320-List at Catalina320.com>
Subject: Re: [C320-list] Relocate Engine Thur-Hull
I "solved that problem" by always leaving mine open.
Mike
On Your Mark #408
Sent from my iPhone
> On Sep 17, 2015, at 20:24, amshd2 at aol.com wrote:
>
>
> Has anyone relocated the engine thru-hull from under the aft berth to more accessible location.
>
>
> I am tiered of pulling the aft berth apart every time I need to open and close it. I am looking at the area just forward of the galley along the center line. This is where the bilge pump is located on the 94 models. Will this work??
>
> Tony
>
> Chica Caliente
> Hull #30
> 1994
>
>
> -----Original Message-----
> From: Jeff Hare <Catalina at thehares.com>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Tue, Sep 15, 2015 12:03 pm
> Subject: Re: [C320-list] fresh water intake hose
>
>
> Jim,
>
> It's 5/8". I ordered the 6 feet length of Shieldsflex II Marine Water
> and Exhaust Hose from Jamestown Distributers.
> That is enough to replace the
> whole length of raw water intake from the thru-hull to the water pump and give
> you enough to have some spare short sections for the thru-hull.
>
> That bend
> will degrade faster than the rest because of the tight
> radius.
>
> http://www.jamestowndistributors.com/userportal/show_product.do?pid=578
>
> -Jeff
>
> -----Original
> Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com]
> On Behalf Of jim brown
> Sent: Tuesday, September 15, 2015 10:35 AM
> To: C320
> List <c320-list at lists.catalina320.com>
> Subject: [C320-list] fresh water intake
> hose
>
> Anyone know off hand the size of the fresh water intake hose? I'm
> beginning to see the wire come through on the 90 degree bend so it's bound to
> go. Can't find a size on the hose but it is labeled verflex marine exhaust
> cerified (and presume s certified as well) There was an email recently about an
> alternative to soften the acute bend where it seem to be failing but I can't
> find it. 2014 Hull 973 Thanks.Jim Brown Desafinado
>
>
>
>
>
More information about the C320-list
mailing list