[C320-list] Relocate Engine Thur-Hull

[rick.krantz]

Placed a 6" × 6" hand hole with hinges just in front of the Raycor. Just lift the mattress rather than having to remove it. The hinges were under $10.00.RickKIKI II


Sent from my Verizon Wireless 4G LTE smartphone

-------- Original message --------
From: Chris Burti <clburti at gmail.com> 
Date: 09/17/2015  5:41 PM  (GMT-08:00) 
To: C320-List at Catalina320.com 
Subject: Re: [C320-list] Relocate Engine Thur-Hull 

Tony,
Just put a six inch inspection plate forward of the Racor filter.

Thanks,
Chris Burti

-----Original Message-----
From: "Michael Rauh" <raceannouncer at verizon.net>
Sent: ‎9/‎17/‎2015 5:19 PM
To: "C320-List at Catalina320.com" <C320-List at Catalina320.com>
Subject: Re: [C320-list] Relocate Engine Thur-Hull

I "solved that problem" by always leaving mine open.

Mike
On Your Mark  #408


Sent from my iPhone

> On Sep 17, 2015, at 20:24, amshd2 at aol.com wrote:
> 
> 
> Has anyone relocated the engine thru-hull from under the aft berth to more accessible location.
> 
> 
> I am tiered of pulling the aft berth apart every time I need to open and close it.  I am looking at the area just forward of the galley along the center line. This is where the bilge pump is located on the 94 models.  Will this work??  
> 
> Tony 
> 
> Chica Caliente
> Hull #30 
> 1994  
> 
> 
> -----Original Message-----
> From: Jeff Hare <Catalina at thehares.com>
> To: C320-List <C320-List at Catalina320.com>
> Sent: Tue, Sep 15, 2015 12:03 pm
> Subject: Re: [C320-list] fresh water intake hose
> 
> 
> Jim, 
> 
> It's 5/8".  I ordered the 6 feet length of Shieldsflex II Marine Water
> and Exhaust Hose from Jamestown Distributers.
> That is enough to replace the
> whole length of raw water intake from the thru-hull to the water pump and give
> you enough to have some spare short sections for the thru-hull.
> 
> That bend
> will degrade faster than the rest because of the tight
> radius.
> 
> http://www.jamestowndistributors.com/userportal/show_product.do?pid=578
> 
> -Jeff
> 
> -----Original
> Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com]
> On Behalf Of jim brown
> Sent: Tuesday, September 15, 2015 10:35 AM
> To: C320
> List <c320-list at lists.catalina320.com>
> Subject: [C320-list] fresh water intake
> hose
> 
> Anyone know off hand the size of the fresh water intake hose? I'm
> beginning to see the wire come through on the 90 degree bend so it's bound to
> go. Can't find a size on the hose but it is labeled verflex marine exhaust
> cerified (and presume s certified as well) There was an email recently about an
> alternative to soften the acute bend where it seem to be failing but I can't
> find it. 2014 Hull 973  Thanks.Jim Brown     Desafinado
> 
> 
> 
> 
>