[C320-list] Replacement of Refer Evaporator

[Ade Bateman]

> On Wed, Aug 17, 2016 at 16:02:28, Descher, Chris wrote:
> I did mine on #500 a few years ago and it was easy.  I replaced both the
> evaporator and the compressor, and since these systems are pre-charged with
> the self-sealing connectors, there's not much to it.  First, I installed the
> new compressor.  Then, I took the new evaporator into the cabin and carefully
> unrolled the new line set.  At this point the evaporator was in the middle of
> the cabin with the lines pointed aft.  Then it was just a process of
> patiently feeding the lines back through the conduit to the compressor.  Once
> that was done, it was pretty easy to train the lines in the ice box to where
> they needed to be and reinstall the evaporator and the thermostat.
> 
> When it was all in place, I connected the lines to the compressor, and that
> was it.

Hi Chris,

Do you know which evaporator/compressor you used? Did they come together?

Thanks,

Ade.