[C320-list] Lewmar port leaks

[tharrison at innovations-plus.com]

Please let us know what solved the problem.

Ted

-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of Jamie Pett
Sent: Sunday, July 17, 2016 10:30 PM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Lewmar port leaks

Ted - thanks. I re- caulked  those and unfortunately it didn't solve the
problem. Did what you suggested - used a small flat screwdriver and pulled
out the old material - you called it a gasket but I think is was a putty on
my boat- then re-caulked them. I used Boatlife, which was a mistake as it
was hard to work with but still formed a good seal.  Nevertheless , still
have one window leaking right at the latches.

Warren may be on to something if there is a bad o ring at the latch that
would explain it.  

Sent from my iPad

> On Jul 17, 2016, at 5:19 PM, "tharrison at innovations-plus.com"
<tharrison at innovations-plus.com> wrote:
> 
> The window comes in two parts, a top and a bottom. Between the top and 
> bottom right at the connection points on both sides there is a gasket. 
> One on each side. You have to dig this out with a pick. I worked on 
> this for two years trying to stop the window leaks. Then a wise 
> gentleman (Jeff) told me about the gaskets
> 
> It is most likely the source of your leak. It takes about 30 minutes 
> per window to clean, tape and fill. Let dry for a few hours and I am 
> done with my leaks.
> 
> Ted
> 
> -----Original Message-----
> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
> Behalf Of Jamie Pett
> Sent: Sunday, July 17, 2016 4:29 PM
> To: C320-List at Catalina320.com
> Subject: Re: [C320-list] Lewmar port leaks
> 
> Ted - not sure what gasket you mean ? I recalled the small horizontal 
> seams on the window frame bit have not re- bedded the entire window. 
> The water looks like it is entering at the latch.  -J
> 
> Sent from my iPad
> 
>>> On Jul 17, 2016, at 2:02 PM, "tharrison at innovations-plus.com"
>> <tharrison at innovations-plus.com> wrote:
>> 
>> I had the same problem and Jeff provided my answer.
>> 
>> Did you remove the gasket between the two half window frame. I pull 
>> this out and sealed with 4200 and not a leak this year at all.
>> 
>> Ted
>> Hull 424 1997
>> 
>> 
>> -----Original Message-----
>> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On 
>> Behalf Of Jamie Pett
>> Sent: Sunday, July 17, 2016 1:58 PM
>> To: C320-List at Catalina320.com
>> Subject: [C320-list] Lewmar port leaks
>> 
>> Help! I know there are a number of posts and I read as many as I 
>> could find re the operable ports leaking. I have thoroughly cleaned 
>> the glass
> and
>> cleaned the seals with Armoural.   
>> 
>> I have re-caulked the exterior small horizontal seams in the frames. 
>> 
>> I have removed the inner plastic frame covers and tightened all the 
>> mounting screws.
>> 
>> My port side  remains leaking, mostly the aft port light. 
>> 
>> The leaks seem to be right at the dog or bolt that holds the port 
>> light closed. The dog seems tight and secure and I cannot figure out 
>> even how to remove it and check it further.
>> 
>> Any insight is appreciated. It rained hard last night and I got 
>> easily a pint of water through this light, soaked the port settee, 
>> the locker cover etc.
>> 
>> Thanks - Jamie
>> Bella Luna # 614
>> 
>> Sent from my iPad
>