[C320-list] Replacing exhaust hose
Rod Boer
rod.boer1 at verizon.net
Thu Apr 6 09:09:50 PDT 2017
Graeme,
Thanks for the input. It seems like the corrugated hose is the way to go. I
checked the specifications and it seems to make sense.
Rod
-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf
Of Graeme Clark
Sent: Thursday, April 06, 2017 9:48 AM
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Replacing exhaust hose
Rod
I just did this job and it was simple. However I purchased a hose like this
http://www.hyphose.co.uk/marine-exhaust/marine-exhaust-hose
which has corrugations to help bending
Obviously that British supplier won't be any use to you but I'm sure you can
get something similar in USA
Whole job took less than an hour
Graeme
Sent from mobile: please excuse typos etc.!
> On 6 Apr 2017, at 14:20, Rod Boer <rod.boer1 at verizon.net> wrote:
>
> All,
>
>
>
> I need to replace the exhaust hose on Odyssey, hull 688. Last weekend
> I reviewed the routing, in particular the relatively tight loop in the
> stern before the exhaust thru hull. If the new exhaust hose is
> anywhere near as stiff as the current one, I question whether I have
> the strength to route it. Maybe the hose has stiffened over the last
> 17 years. I would appreciate any information that anyone can
> contribute regarding replacement of the exhaust hose from the muffler to
the thru hull. Thanks.
>
>
>
> Rod Boer
>
> Odyssey, #688
>
More information about the C320-list
mailing list