[C320-list] Microwave Solution Found

[Rich D]

Have not secured it yet, but plan was to use two 1.5" wood screws through
the original holes under cabinet and have them screw into the sheet metal
at the bottom of microwave.  It's a snug fit, but just in case.

Rich

On Tue, Aug 22, 2017 at 4:02 PM, Bruce Hunter <swampcreek42 at yahoo.com>
wrote:

> Yes! And with great info too!
> Thanks!
> Bruce Hunter
> Nauti Time #719
> Pasadena MD
>
> Sent from Yahoo Mail on Android
> <https://overview.mail.yahoo.com/mobile/?.src=Android>
>
> On Tue, Aug 22, 2017 at 3:39 PM, Rich D
> <rich.catalina320 at gmail.com> wrote:
> Greetings,
>
> After reading several posts and spending many hours searching for a
> replacement microwave that fits without boat modifications, I finally found
> a good solution.  Pictures posted on Catalina320, members album Stella
> Maris.  Model is Danby DMW077BLSDD.  Two plastic feet in the front need to
> be removed.  Rear feet are pressed sheet metal, drill hole and gently tap
> in with hammer to flush.  There is one small screw that needs to be cut off
> that would protrude below the modified bottom.  Fits perfectly in my 04.
> Plenty of clearance under unit for ventilation.  Hope this helps.
>
> Also, first post to list. Did this come through OK?
>
> Thanks,
> Rich
>
>