[C320-list] Batteries Volts

[Greg Flanagan]

12.5 sounds low. My float voltage is 13.3. 
I use the Balmar Smartgauge. Pricey but easy to install and sophisticated enough to adapt to battery ageing. Shows capacity as percentage and voltage for main battery and voltage for the starter battery. 

Hoop Dancer #1076
Greg Flanagan 
Sidney, BC 

> On Jul 5, 2017, at 3:18 PM, Ted Harrison <tharrison at innovations-plus.com> wrote:
> 
> Two new 4 d batteries installed in parallel. 
> 
> Each battery has a positive cable to the charger. The charger is a ProMariner 12 / 30 P
> 
> Charged for the first time last night. It went through conditioning mode, then charging mode and now sits at ready mode. 
> 
> Have not install the battery monitor nor the echo  trickle charger for the starter battery. Starter battery sitting on shelf ready to connect. 
> 
> What volts should the batteries read ? Currently they read 12.5 on the volt meter.
> 
> What battery monitor system would you recommend? 
> 
> Thanks for all your help to get me this far on my project. 
> 
> Ted Harrison
> Hull 424