[C320-list] Alternator to batteries
tharrison at innovations-plus.com
tharrison at innovations-plus.com
Sat Mar 25 19:30:21 PDT 2017
I am right there with you. This is going to be a first for me.
Ted
-----Original Message-----
From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of John Meyers
Sent: Saturday, March 25, 2017 8:14 PM
To: C320-List at catalina320.com
Subject: Re: [C320-list] Alternator to batteries
Thank you for that important education.
I am still not an electrician but now I know more.
John Meyers
On Mar 25, 2017 8:01 PM, "Stephen Cox" <scox at timmin.com> wrote:
> I am no electrician so I don't know if this will work. I assume that
> there are wires from the alternator directly to the battery(?) If so
> can the positive wire (maybe the negative wire too) be CAREFULLY
> disconnected from the battery after the engine is running and have a
> volt meter test the output on those disconnected wire?
>
DO NOT DISCONNECT THE WIRES WHILE ENGINE IS RUNNING!!!!
First off you don't need to disconnect the wires to measure the voltage on them.
Secondly, if you run the alternator without a load it is equivalent to switching the 0-1-2 switch through the 0 position when running and will most likely fry the alternator diodes.
Stephen Cox
Tegwen #1141
More information about the C320-list
mailing list