[C320-list] Leaking Opening Port
Scott Westwood
scottwestwood at bellsouth.net
Thu Oct 5 04:13:42 PDT 2017
I agree with John M. Our boat had the same leaking port(s). The outside split frame did it. I dug out the "s" gasket. and crammed in Bytle tape sealant (comes on a roll from Lowes/HD in the window weatherstripping department) and no leaks since.
I went around the whole boat 3 years ago and did every split frame. No leaks "there" since.
Thanks,
Scott Westwood scottwestwood at bellsouth.net H (919)-362-8538 C (919)-618-7185
From: sail-ability sail-ability <sail-ability at sympatico.ca>
To: Christian <ccaper at gmail.com>; c320-list <c320-list at catalina320.com>
Sent: Wednesday, October 4, 2017 2:18 PM
Subject: Re: [C320-list] Leaking Opening Port
There should be an article on our website on how to fix this. U need to
replace the "S" gasket between the two haves of the frame. did mine 7
years ago and no leaks to date.
Cheers
JohnM
1999#574
---------- Original Message ----------
From: Christian <ccaper at gmail.com>
Date: October 4, 2017 at 1:59 PM
My fore most, starboard side, opening port light is leaking pretty
bad.
This opening port light is the original Lewmar model (aka Old Std),
original Plexiglas. I've replaced the O rings in the dog ears. I've
replaced the Plexiglas gasket. I've tightened all frame screws.
Still
leaking badly.
I now believe the leak is coming from the aluminum frame, and should
be
rebedded.
Any pointers for doing this job? Don't see any material on
CatalinaDirect
for suggested material for rebedding (but plan on contacting them
shortly
for suggestions). I have some of marine compass' butyl tape arriving
later
this week (for another job). But I'm guessing since it's not a high
flex/stress area, there is probably better bedding material.
Thanks,
Christian Caperton
1994 C320 "Canuck" #138
Monroe Harbor, Chicago, IL
More information about the C320-list
mailing list