[C320-list] Replacing toilet

[sail-ability sail-ability]

   I installed a Raritan manual toilet a few years ago and it was
   documented in an issue of the MAINSHEET. Not sure if its still on the
   web site. In any event the old toilet is held in place with Lag Screws,
   no nuts and bolts. I used ss lag screws to hold the new Raritan in
   place. The platform , as I recall, is fairly thick plywood.

   Cheers and good luck.

   JophnM

   1999#574

     ---------- Original Message ----------
     From: Doug Treff <doug at treff.us>
     Date: October 26, 2017 at 8:37 AM
     All,
     This winter, I will be replacing my toilet with a Dometic
     Masterflush.
     Curious if any of you have removed and replaced your toilet, and
     what
     kind of bolts hold it down to the little ledge in the head. I can't
     see
     an easy way to get under that ledge to install nuts and washers on
     the
     back side, so I'm curious what I'll find when I remove the old one.
     And yes, before anyone asks, I'll be taking pictures and documenting
     the
     process for everyone else.
     Thanks,
     --
     Doug Treff
     doug at treff.us

   >