[C320-list] How deep do I drill?

[Graeme Clark]

Further to this - investigation showed I had drilled right through a cable so I cut back the gelcoat and dig around and eventually found a coiled length of cable with black and white cores
However I seem to have TWO ends, nit sure what is leading where? Have I drilled through some unrelated cable I wonder, nit that I can think of anything else that would run there?
The next problem is finding the other end of this cable. There is a similar cable hanging down hear the holding tank but this is not electrically continuous with the cable at the deck
Or is this cable designed to pull a new cable through rather than as an actual electrical connection?
Any help much appreciated!
Graeme

Sent from mobile: please excuse typos etc.!


> On 3 Apr 2018, at 10:46, Graeme Clark <cg at skyflyer.co.uk> wrote:
> 
> I’m trying to find the void with wiring harness for solar wiring
> Manual says 14” back from edge of hatch cover. (Admittedly it states earlier hulls had harness in port side but as drawing is dated 93 and I have a 96 year and batteries are in starboard side I’m assuming it’s actually in starboard side on mine)
> I’ve drilled about 5/8” deep. Manual says 3/16ths
> Now wondering if harness never installed in my boat (maybe because destined for the grey overcast U.K.!)
> How deep can I drill without risk of making a hole in the saloon or heads ceiling!
> Thanks
> Graeme
> PS photo available at this link
> https://ibb.co/kXvj2H
> 
> 
> Sent from mobile: please excuse typos etc.!
>