[C320-list] Furlex Jib Furling Gear
Jon Vez
jonvez at comcast.net
Fri Dec 7 13:46:36 PST 2018
Angus,
I have the Series 200S model. I can get the specific model number if you like....
Sent from my iPad
> On Dec 7, 2018, at 3:47 PM, Angus Henderson <rathlyn1 at gmail.com> wrote:
>
> Thanks everyone for your very useful comments. Warren at Catalina was indeed very helpful. It sounds as though rebuilding the Schaffer drum might be a good option, if possible, but also good to know that the Seldon Furlex equipment is a good option.
>
> Jon, I was wondering which model of Furlex was fitted to your C355? The Furlex 207-15 model has been suggested for my C320.
>
> Angus
>
>> On Dec 7, 2018, at 3:27 PM, Jon Vez <jonvez at comcast.net> wrote:
>>
>> I don’t think you can go wrong with any of the 3 that have been mentioned. My 320s Schaefer worked fine for 12 years. My current 355 came from the factory with the Furlex and I’m very happy with it. I will say that the company Selden is very good to work with as is Schaefer . Selden’s masts are a different story and are superior in my opinion.
>> Sometimes your rigger will have a preference and perhaps picking the rigger and going with their recommendation (cost considered) is the way to go....good luck
>>
>> Sent from my iPad
>>
>>> On Dec 7, 2018, at 9:42 AM, Angus Henderson <rathlyn1 at gmail.com> wrote:
>>>
>>> Thanks. Unfortunately the foil was accidentally damaged and needs replacement. Damage to the drum is uncertain at this point. Buy am considering replacement of entire assembly. I am interested in member’s experience with Furlex vs Schafer but it looks like the latter is fitted to most member’s boats.
>>> Thanks
>>> Angus
>>>
>>> Sent from my iPhone
>>>
>>>> On Dec 6, 2018, at 11:03 PM, Allan S Field <allan.field at verizon.net> wrote:
>>>>
>>>> The original Schaefer lower bearing assembly was defective in that Schaefer thought it was maintenance free; they were wrong and the things start to seize up over time. Schaefer has been replacing them at their cost for several years with ones that have a flush hole in the drum. I would suggest pursuing that option first if seizing up is your issue. We replaced ours on our C320 and are replacing the one on our C387 this winter. I think the cost for the C320 was about $100.
>>>>
>>>> Allan S. Field
>>>> Sea Shadow - C387, #103 (formerly C320, #808)
>>>> Columbia, MD
>>>>
>>>>
>>>>
>>>> -----Original Message-----
>>>> From: C320-list [mailto:c320-list-bounces at lists.catalina320.com] On Behalf Of Jerry's Iphone
>>>> Sent: Thursday, December 6, 2018 9:55 PM
>>>> To: C320-List at Catalina320.com
>>>> Subject: Re: [C320-list] Furlex Jib Furling Gear
>>>>
>>>> I agree Tim. The Schaeffer hub replacement was much cheaper than a complete furler change out on our 2004 C320.
>>>>
>>>> Sent from my iPhone
>>>>
>>>>> On Dec 6, 2018, at 3:47 PM, Timothy Woods <woodstimothya at gmail.com> wrote:
>>>>>
>>>>> Furlers are expensive to replace, if I keep my boat another season I
>>>>> plan to change my forestay and buy the replacement Bearings from Schaefer.
>>>>>
>>>>> Good luck, Tim
>>>>>
>>>>>> On Thu, Dec 6, 2018, 3:38 PM Gus Macdonald <rathlyn1 at gmail.com wrote:
>>>>>>
>>>>>> I am having to replace my jib furling gear which is a Schafer 2100 unit.
>>>>>> Catalina are now apparently fitting Furlex units and so I am now
>>>>>> considering that manufacturer. Does anyone have any experience with
>>>>>> Furlex
>>>>>> (Seldon) jib furlers for the C320? Comments would be appreciated.
>>>>>>
>>>>>> Angus Henderson
>>>>>> Hull# 999
>>>>>> Georgian Bay
>>>>>>
>>>>>>
>>>>>>> On Nov 29, 2018, at 9:48 AM, John Brennan
>>>>>>> <jackbrennan at bellsouth.net>
>>>>>> wrote:
>>>>>>>
>>>>>>> Just a heads up that there are good deals to be had on Raymarine EV
>>>>>>> 100
>>>>>> autopilots between now and Christmas.
>>>>>>>
>>>>>>> I just bought a wheel pilot at Boatersland Marine for $1,275.95 plus
>>>>>>> a
>>>>>> $200 rebate from Raymarine, no shipping or tax. The rebate is good
>>>>>> for several more weeks.
>>>>>>>
>>>>>>> The boxes are sitting under the Christmas tree now, awaiting
>>>>>> installation in time for a New Year’s Eve cruise.
>>>>>>>
>>>>>>> The only downside is the @##%%^^ registration process at Raymarine
>>>>>>> for
>>>>>> the extended warranty (do that first) and the rebate. The UPC code,
>>>>>> which is not listed anywhere, is 723193770722. The manufacturer’s
>>>>>> number is T70152.
>>>>>>>
>>>>>>> Jack Brennan
>>>>>>> Sonas, 1998 Catalina 320, no. 528
>>>>>>> Tierra Verde, Fl.
>>>>>>> Dolphin Cruising Club of Tampa Bay
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Sent from Mail for Windows
>>>>>>>
>>>>>>
>>>>>>
>>>>
>>
>
More information about the C320-list
mailing list