[C320-list] Bomar hatch

[John morrison]

Ted I just removed the centre hatch on my boat as it was also leaking, I’m buying a new lens from Fort Glass, as the old one had several cracks in it. I’m also going thicker, 10mm, as the 1/4” lens is not strong enough in my opinion. I took the hatch right off the boat and cut around the lens into the caulking with a box cutter; it then came out fairly easily and then I scraped out the rest of the caulk. I’m going to use dow Corning 795 which Catalina recommends. 
Regards
JohnM
> On Mar 23, 2018, at 6:42 PM, Ted Harrison <tharrison at innovations-plus.com> wrote:
> 
> This hatch is located at the bow of the boat and leaks. I have remove the hatch and have it home.
> 
> It looks like the lens just sits on this rubber gasket. They have separated on one corner and down about 10 inches in each direction.   No wonder it leaks. 
> 
> How do I pull the lens completely off and re-seal? With what product ?
> 
> Thanks for your help. 
> 
> Hull 424
> Whitby On  
> 
> Ted Harrison