[C320-list] Bomar hatch

[Ted Harrison]

Thanks John. I will remove the Lens tomorrow. 795 is not available in Canada.

Ted Harrison

> On Mar 23, 2018, at 7:55 PM, John morrison <sail-ability at sympatico.ca> wrote:
> 
> Ted I just removed the centre hatch on my boat as it was also leaking, I’m buying a new lens from Fort Glass, as the old one had several cracks in it. I’m also going thicker, 10mm, as the 1/4” lens is not strong enough in my opinion. I took the hatch right off the boat and cut around the lens into the caulking with a box cutter; it then came out fairly easily and then I scraped out the rest of the caulk. I’m going to use dow Corning 795 which Catalina recommends. 
> Regards
> JohnM
>> On Mar 23, 2018, at 6:42 PM, Ted Harrison <tharrison at innovations-plus.com> wrote:
>> 
>> This hatch is located at the bow of the boat and leaks. I have remove the hatch and have it home.
>> 
>> It looks like the lens just sits on this rubber gasket. They have separated on one corner and down about 10 inches in each direction.   No wonder it leaks. 
>> 
>> How do I pull the lens completely off and re-seal? With what product ?
>> 
>> Thanks for your help. 
>> 
>> Hull 424
>> Whitby On  
>> 
>> Ted Harrison
>