[C320-list] vented loop

[BILL CARR]

 Thanks for the info. If you have any pictures I would like to see the exact route of the hoses and the location of the vent.

 I am  not going to be much help on the story about the re power. I looked at the Beta and the Yanmar options but ended up going with the Volvo Penta D1-30 mostly because it uses the same block as my old Perkins. I was hoping this would save me on the installation. I don't  know if it really did. Unfortunately I was visiting my daughter in England when the job was being done so I didn't get to watch or document any thing.  It seems a bit quieter than the old Perkins and has no smoke. I am looking forward to more than just day sailing to get more of a motoring experience.

 Thanks for your input. Bill , Utopia #31

> On May 2, 2018 at 2:55 PM Warren Updike wrote:
> 
> 
>     Bill and all, repowering would be a great topic for a Mainsheet article. With models now 24 years old, repowering will be a project that other owners will be faced with. All it would take on your part is a simple log of notes as you go along and a few pictures. The Technical Editor (me) will be happy to write the article from your notes, or you may pen the article yourself. I have received several very excellent articles with great pictures from other owners; and, I admit they did a far better job of it than would I.
> 
>     As for the vented loop, somewhere along the line it was moved from the engine compartment, as described, into the port side locker. Probably standards changed. We had to deal with this when we installed A/C.
> 
>     It can be moved by running the hoses through the space under the locker and behind the refer. There would have to be holes drilled in the deck of the locker. You must investigate the content of that space before drilling as there are two FRP conduits running under the locker deck. One, for the refrigerator lines, and one for the propane lines (at lease on #62.) You can use a remote scanning camera (Harbor Freight) or a small hand-held camera to view the inside of the space before you drill.
> 
>     I may be able to dig-up some pictures. If you are interested, contact me off-list. We had to drill holes in the locker deck when installing A/C.
> 
>     Warren and Pattie Updike
>     1994 C320 "Warr de Mar" #62
>     Middle River, MD (Chesapeake Bay)
> 
>     -----Original Message-----
>     From: BILL CARR [mailto:bcarr8239 at comcast.net mailto:bcarr8239 at comcast.net ]
>     Sent: Tuesday, May 01, 2018 10:32 PM
>     To: c320-list at catalina320.com mailto:c320-list at catalina320.com
>     Subject: [C320-list] vented loop
> 
>     I re powered Utopia hull #31 The Mechanic tells me the original location for the vented loop is not high enough for the standard. I am hoping the later models have a way of mounting it that is further above the water line. I would appreciate any input. Bill
>