[C320-list] Looking for putty

[Edward Thompson]

Scott: There are several products out there that will probably do the trick. One you might consider is Marinetex which you can get at West Marine.

> On Sep 6, 2018, at 10:11 AM, Scott Westwood <scottwestwood at bellsouth.net> wrote:
> 
> I need to fill an irregular concave void for a backing plate on the inside of rough fiberglass.  I heard of a putty type material (I think it was pink?) that you can cram into a void and it would harden.  I don't want anything that will flex.
> I could use that tube of grey steel 2-part putty but in my experience it cures brittle.  That would likely crumble with vibrations over time???
> The void is small.  Maybe 1 inch wide by about 4-5 inches long and about 1/2 inch think.  I can't smooth it out enough.  I need to fill the voids.
> Any thoughts? 
> Thanks,
> Scott Westwood scottwestwood at bellsouth.net H (919)-362-8538    C (919)-618-7185