[C320-list] Looking for putty
argates2nd
argates2nd at comcast.net
Thu Sep 6 09:52:20 PDT 2018
I used Westsystem, a two part that comes in a caulking tube and mixes as you caulk.Rollie. #182
Sent from my Verizon 4G LTE smartphone
-------- Original message --------
From: Edward Thompson <edthompson3 at outlook.com>
Date: 9/6/18 11:05 AM (GMT-05:00)
To: C320-List at Catalina320.com
Subject: Re: [C320-list] Looking for putty
Scott: There are several products out there that will probably do the trick. One you might consider is Marinetex which you can get at West Marine.
> On Sep 6, 2018, at 10:11 AM, Scott Westwood <scottwestwood at bellsouth.net> wrote:
>
> I need to fill an irregular concave void for a backing plate on the inside of rough fiberglass. I heard of a putty type material (I think it was pink?) that you can cram into a void and it would harden. I don't want anything that will flex.
> I could use that tube of grey steel 2-part putty but in my experience it cures brittle. That would likely crumble with vibrations over time???
> The void is small. Maybe 1 inch wide by about 4-5 inches long and about 1/2 inch think. I can't smooth it out enough. I need to fill the voids.
> Any thoughts?
> Thanks,
> Scott Westwood scottwestwood at bellsouth.net H (919)-362-8538 C (919)-618-7185
More information about the C320-list
mailing list