[C320-list] Push Button Circuit Breaker
Troy Dunn
troutwarrior at gmail.com
Mon Sep 17 18:19:31 PDT 2018
Yup, no in line fuses were installed originally, and... I am actually very
dissapointed with many of the factory cable terminations, some of the
crimping belongs on Mainesails hall of fail.
Troy
On Mon, Sep 17, 2018 at 8:43 PM Jeff Smith <jeffreyssmith at live.com> wrote:
> Troy,
>
> Thanks. I am pretty sure the wire is the appropriate AWG as recommended by
> the installation manual; this suggests to me that it should be sufficient
> to handle the load. However, I will confirm before installing the charger.
> Between the battery charger, the new Blue Sea Terminal Fuse Block and fuse
> (currently no inline fuses on the battery cables), and possibly new wiring,
> the costs continue to increase. The joys of boat ownership....
>
> Jeff, '94, #121
>
> On 9/17/18, 8:28 PM, "C320-list on behalf of Troy Dunn" <
> c320-list-bounces at lists.catalina320.com on behalf of
> troutwarrior at gmail.com> wrote:
>
> Jeff
>
> In case you didn’t know...The breakers are there to protect your wiring
> which will catch fire if pushed past their limit. If there is a 10
> amp
> breaker for your current charger but your new charger requires 15 amps,
> you’ll need to run wire sized to handle 15 amps from your new breaker
> to
> your new charger.
>
> Respectfully
>
> Troy Dunn
> Hull#514
>
> >
> >
> >
> >
> >
>
>
>
>
More information about the C320-list
mailing list