[C320-list] Hatch Size

[John Morrison]

I wouldn’t replace it. I removed mine and cut out the lens and went to a glass place, used the old lens as a template and bought a new plexiglas 10mm lens. Used Dow Corning 795 to rebed it. Worked like a hot damn!
JEM
1999#574

Sent from my iPhone

> On Sep 25, 2018, at 2:21 PM, Bruce Hunter <swampcreek42 at yahoo.com> wrote:
> 
> Our saloon cabin top hatch is a Lewmar, outside dimensions on top about 20"x20" height about 1.25", I'm almost sure it's a Lewmar size 44 mid height profile hatch but not 100% sure. It was leaking pretty bad so I simply tightened the Phillips head screws down, they were pretty loose. The leaking has seemed to have stopped but I think I should take it off and check for water damage in the core if it ever stops raining. Also, the lense is really crazed and of course the whole thing needs rebedding,  I figure I should just replace it and be done. Defender has them for around $420 +/-. The boat is a year 2000 but DOM was Nov. '99. Anyone know for sure?
> Thanks 
> Bruce HunterNauti Time #719
> 
> Sent from Yahoo Mail on Android