[C320-list] Attaching Loose Rub Rail

[Clay Carter]

Thank you Joe--I was able to easily get the rub rail back into the channel without a hair dryer or assistance--it is very loose (too loose) and pulls out easily.  Does anybody have any suggestions on how to permanently attach the rub rail into the channel so that it won't come out again?
Thank you.





 

    On ‎Monday‎, ‎August‎ ‎19‎, ‎2019‎ ‎02‎:‎28‎:‎20‎ ‎PM‎ ‎CDT, SCHWARTZ <schwartz781 at optimum.net> wrote:  
 
 Ahoy....heat gun or hair dryer to warm rubber,,,four hands,,, wide screwdriver or putty knife...work is easy but slow. Good luck,,,Happy Tuesday,,,,Joe,,#245
> On August 19, 2019 at 1:39 PM Clay Carter <fclaycarter at yahoo.com> wrote:
> 
> 
> On a recent windy day with plenty of heeling and splashing I returned to my slip and found my port rub rail completely removed the entire length of the boat.  The track seems fine, but the rub rail was just hanging halfway down the side of the hull.  I was able to press it back in temporarily, but I know it is going to fall right back out--anybody have suggestions on how to permanently fix it?
> Thank you.
> Clay Carter1995 "We'll Sea"Long Beach, CA
> 
> 
> 
> 
> 
> 
>