[C320-list] Spinnaker Halyard Chafe...

[Guy Smith]

Hey All!
Wanted to ask for y'alls collective wisdom on an issue with my spinnaker Halyard...
When I fly the Chute and come up to anything above 100 degrees apparent, I get chafing on the halyard from the sides of the Sheave housing at the Mast Head. (I love reaching with the Chute! :))
I have a pic that I can upload from my last trip up the Mast if anyone wants to see the housing.I sent the pic to a friend of mine (Andy Schell) who worked as a Rigger in Annapolis a while back and he said that my Mast Head is not rigged with a "proper Spinnaker Halyard setup". 
Quote:"It’s not a proper spin halyard setup which is why. Should be external on a bail/block at the masthead, FWD of everything. Without major mods you can just add extra cover and replace as needed and just live with it...-Andy"
Anybody had this problem and fixed it, other than adding a cover to the Halyard and replacing it often?
It's kinda scary... At times the Halyard is sawn up pretty good! I've been cutting a section off the Halyard almost every time I fly it, unless I'm mostly 100-120 apparent.There are times when I set the Chute heading up/down the bay for hours. (If conditions are favorable...)I'm a little leary to do that now adays...
Kinda interesting that Catalina would not rig a "Proper Spinnaker Halyard setup"...
Anyway, Thoughts anyone?
Regards,~g
Guy and Liz Smithsv Pleiades '97 C320 #452Worton Creek, MD