[C320-list] Asymmetrical chute question

[Doug Treff]

Graeme,

Is that the standard masthead? Have you re-rigged anything?

I don't have a line marked Spinnaker halyard. I have two halyards marked Jib 1 and Jib 2. I have hull number 350 so I'm thinking our masthead should be the same.

Thanks,

--
Doug Treff
doug at treff.us

On Mon, Jul 29, 2019, at 11:18 AM, Crosby Roper wrote:
> Thanks all. Graeme. That picture was just what I  needed. 
> 
> Crosby 
> 
> Sent from my iPhone
> 
> > On Jul 29, 2019, at 3:07 AM, Graeme Clark <cg at skyflyer.co.uk> wrote:
> > 
> > Sorry, I should have added that the green and white line is the spinnaker halyard and the blue and white the jib halyard
> > G
> > 
> > Sent from my phone. Excuse typos! 
> > 
> >> On 29 Jul 2019, at 10:58, Graeme Clark <cg at skyflyer.co.uk> wrote:
> >> 
> >> Not sure if this link will work but if so it shows the masthead where the spinnaker and Genoa halyards exit
> >> 
> >> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fshare.icloud.com%2Fphotos%2F0p2LqLXIBu7kgR1we4kRx4eJg&data=02%7C01%7C%7C169d93447a5643af263508d7140c97b7%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C636999916622881545&sdata=KCx2hOMus5VnsUzVeyp5ucdBeGOzNiaUbkdsFw3gXXI%3D&reserved=0
> >> 
> >> Graeme
> >> 
> >> Sent from my phone. Excuse typos! 
> >> 
> >>> On 29 Jul 2019, at 04:23, Martin Rosenberg <martinlrosenberg at gmail.com> wrote:
> >>> 
> >>> You should be able to do either depending on the situation. In very heavy
> >>> winds I always brought it inside between the furled jib and the spin.
> >>> Marty
> >>> 
> >>> On Sun, Jul 28, 2019, 6:50 PM Ted Harrison <tharrison at innovations-plus.com>
> >>> wrote:
> >>> 
> >>>> I am thinking it should be on the outside. That is how we fly it on a c&c
> >>>> 39 on race night. That way you can raise the spinnaker and the drop the
> >>>> jib.
> >>>> 
> >>>> 
> >>>> Ted Harrison
> >>>> Hull 424 Whitby
> >>>> 
> >>>>> On Jul 28, 2019, at 6:34 PM, Crosby Roper <vmdatsea at hotmail.com> wrote:
> >>>>> 
> >>>>> For those of you who fly an asymmetrical chute using the spinnaker
> >>>> halyard, do you jibe the chute forward of the head stay or between the head
> >>>> stay and the mast.ive been trying to find a decent photo of the top of the
> >>>> mast to see whether the halyard exits above or below the head stay but
> >>>> haven’t had any luck. Thanks
> >>>>> 
> >>>>> Crosby Roper VMD
> >>>>> s/v Tethys #1054
> >>>>> San Diego
> >>>>> 
> >>>>> Sent from my iPad
> >>>> 
> > 
>