[C320-list] Transmission Clutch

[Karl Mielenhausen]

A friend had that problem with the 3GM in his Hunter.
Shipped the tranny to the nearest Mack Boring location for a cone clutch
rebuild.

Karl


On Fri, May 31, 2019 at 7:47 PM Tim <chillinonahd at yahoo.com> wrote:

> Hi All -
> Hull #603 appears to be in need a new transmission clutch. Less than 900
> hours but the research I have done indicates this is a known problem. The
> symptoms are significant vibration only in FWD and sometimes goes away with
> a bit of throttle. At first I was suspecting the folding prop but spoke to
> the manufacturer and since it has a gear he did not think this was the
> cause. Then this year, it seems worse and also feels like it slipping even
> when moving and smooth. So my question to the group is; does anyone
> know/recommend a repair facility in the Long Island area for this type of
> work. My boatyard is good at basics, but don't trust them with this type of
> work.
> Can I remove the transmission and ship it somewhere if needed, how
> involved might that be?
> Thx
>