[C320-list] M30 Floating Gnd on Temp Sender?
Christian
ccaper at gmail.com
Mon Jun 17 11:59:33 PDT 2019
Dave,
1994 #138 here. I replaced my high temp switch 2 years ago.
I used this one:
https://www.westmarine.com/buy/sierra--temperature-sender-used-with-light--10530822
My original was the 3 terminals, where only 2 where used. One of the
terminals was a ground wire that ran to the engine block.
The replacement I used, the body of the switch grounds into the the base it
screws into, so you can remove the ground to engine wire.
When I did my search, if I remember correct, I saw switches that closed at
170, 180, and 200. My Perkins tends to run normal right at 183F. So I
didn't want false positives, so I went with 200, which is the switch in the
link.
Christian Caperton
1994 C320 #138 "Canuck"
Monroe Harbor, Chicago, IL
More information about the C320-list
mailing list