[C320-list] KM2P SAE 30 OIL level

[CARY DENNIS LOWE]

Help

Sent from my iPad

> On Jun 4, 2019, at 6:11 PM, Doug Treff <doug at treff.us> wrote:
> 
> Jeff, 
> 
> The stated capacity of the transmission is for when it's level. Because it is on a slant, the amount is less. Somewhere I have it written down. I'll look around for the correct amount.
> 
> As others have stated, it's read when the dipstick is set in but not threaded down.
> 
> --
> Doug Treff
> doug at treff.us
> 
>> On Tue, Jun 4, 2019, at 8:19 PM, Jeff Hare wrote:
>> Hi all, Hull 809 with 3gm30f yeu and Km2p transmission...I checked the 
>> transmission oil and saw that it was about 1/4" above the line.  Just 
>> setting the dipstick in, and a little higher when screwed in.  So I 
>> drained the transmission oil and put 300ml (0.3L) back in as the manual 
>> says for this km2p unit.  The oil level is now 1/2" higher than the old 
>> oil level.Is the line on the dipstick just the bare min oil level?    
>> There is no upper oil level line...  I seem to have to ask this every 
>> time.  I have CRS apparently.Am I good here?Jeff Hare