[C320-list] Bomar Trapezoidal Hatch
John Jacobs
johjacob1 at mac.com
Sat Oct 19 04:42:10 PDT 2019
Thanks for the advice. The core is dry and sealed with epoxy. The gaskets are in good shape but the old butyl seal was dry and cracking. I have plenty of butyl for the job.
John Jacobs
Surprise #644
Urbanna, Va.
Sent from my iPad
> On Oct 18, 2019, at 7:54 PM, Troy Dunn <troutwarrior at gmail.com> wrote:
>
> Once you remove the hatch frame check to see if the core is wet. If it
> is, consider covering the opening with cardboard covered with a trash bag
> taped down with rigging tape. Give the core a chance to dry and then dig
> out an inch or so of core and fill with epoxy. This will prevent
> future damage to you core.
>
> Also, FWIW, I really love the butyl tape that RC sells on marinehowto.
> Butyl is definitely the way to go to seal the hatch frame.
>
> I've also replaced the gaskets. As mentioned above, they tend to start to
> pull away from the corners as they age.
>
> Good luck
>
> Troy Dunn
> Hull#514
More information about the C320-list
mailing list