[C320-list] Opening Portlights

[Dave Hupe]

Tape on both the frame and gelcoat with alignment ticks before removal as reference for reinstallation is what I would recommend.  I did this when I installed 4 new stationary long windows for my cabin. I dry fitted the new acrylic lenses and put tick marks on both the new lens protective paper and the tape that I had encircling the window recess to keep it clean from new sealant.
Dave Hupe
1994 Cat320 (#32)
Holland, MI

Sent from Yahoo Mail on Android 
 
  On Wed, Sep 25, 2019 at 7:00 PM, John Jacobs<johjacob1 at mac.com> wrote:   I spent the day removing my four Lewmar, Opening Portlights (Old Standard) on my 1999 and resealing them with Butyl Tape.  It was an easy enough job but I did run into one issue and that was being able to seat them (align) them correctly in the opening.  The first three were no problem and I just eyeballed the alignment and they seated perfectly .  The last one I ended up removing twice, cleaning the frame and cutout again and reseating with fresh butyl.  I somehow feel I should have been more calculating in my approach.  Any advice on how this should have been done?  I feel it was dumb luck that it all came out so well.

John Jacobs
S/V Surprise #644
Urbanna, Va.

Sent from my iPhone